eMotimo spectrum is our latest and greatest
4-axis motion control camera robot!
Learn more about
the spectrum. See product in detail page
What's not included:
Powering specs: 12-24V. Minimum 2A. 3.5A
preferred. Connector: 2.1mm x 5.5mm x 12mm circular barrel
connector – center positive.
We recommend the 23000mAh portable battery pack for its high
capacity, 20 volt output, and portability. Pick
one from us with an included 6 foot extension.
Need an extra remote? We will be offering these
on our site shortly. In the meantime, you can pick one up off
6/4/2016 – Hi eMotimo guys,Curious if you can do re-creatable motions? i.e. Start at position A, slide 1 ft as you pan left 5 degrees . . .
Response From eMotimo: Sure can, Kevin. The spectrum is designed to repeat moves for VFX work. The process is to setup a programmed move, set you start points, end point, timing for the move, ramping, and go. When the move is complete you have the option to repeat, reverse, or reset. You can choose repeat and keep taking passes. In post line up your moves and then fade, cut or blend to switch or combine these passes. -the eMotimo guys
6/1/2016 – Any plans or eta for this to work with the rhino slider?
Response From eMotimo: Hi Brian, thanks for the question! We do have plans to create an adapter for the spectrum to work with the Rhino Evo sliders, although we do not have a delivery date for this just yet. When we have more details and are ready to announce the integration solution, we will post to our social media (https://www.facebook.com/emotimo/) and on our site (http://emotimo.com/). Thanks!
3/31/2016 – For those of us who have a TB3 and selection of non Emotimo stepper motors that work when plugged into the TB3, will you . . .
Response From eMotimo: Hi Andrew,Thanks for the question. If you have a stepper motor with replaceable cables that works with the TB3, the it should work with spectrum. You will just want to swap out your TB3 cable, with a spectrum motor cable, found here: http://store.emotimo.com/spectrum-stepper-motor-cables-p112.aspxThanks!
3/29/2016 – Regarding the remote control - super-cool that it's as simple as a wireless PS controller. But is it possible to connect . . .
Response From eMotimo: Hi Dan, Thanks for the question! At this time we are compatible with just the wireless Sony Dual Shock 4 Bluetooth Controller for PS4. If we release other options for controlling the spectrum we will share on our social media (https://www.facebook.com/emotimo/) and on our site: http://emotimo.com/I hope this is helpful. Thanks!
2/18/2016 – Hi, what 3rd motor for slider will be working with Spectrum? (I'm useing tb3 with Dp motors) Do You thinking about motor . . .
Response From eMotimo: Hi Jacek, thanks for the question! spectrum will integrate with a number of sliders and if you are using a TB3 and Stage 1 or 0 setup check out our FAQ spectrum section for more: https://emotimo.zendesk.com/hc/en-us/categories/201145193-eMotimo-spectrum. You will need to adjust for the pins in the motor if you sourced them from DP and we will provide more details surrounding that setup in the future but the short answer is yes if you are set up for the TB3 that rig will work with spectrum with a few modifications.For the 3rd and 4th motor port you will also be able to use a focus solution. We are working to deliver one and will announce more details around it soon.Let us know if there is anything else we can help you with by emailing us anytime at email@example.com, thanks!
is currently empty